B207R power steering seal replacement
Posted: Sun May 22, 2016 8:06 pm
Hi folks,
Not sure if you have a how to on this already, but here is one for you. I did the job tonight in about 20mins, really easy fix if your power steering pump is pushing fluid out of the reservoir cap.
This is a link to the replacement seal on eBay eBay http://www.ebay.co.uk/itm/161989747487
Tools Needed:
Small "very small" blade screw driver
13mm socket,
3" extension bar,
Ratchet,
Hammer
22mm socket
Firstly undo the 2 M8 (13mm Socket) Bolts holding the Power Steering Pump to the Cylinder Head and pull the pump towards the battery box gently.
Using the small screw driver, pry the seal out of the power steering pump. Be patient with this part, it'll come, go from the outside edge of the rubber and dig it in a bit, take care not to damage the face of the pump.
Place the new seal into position
Press it firmly into place with equal pressure all around and send it home with the 22mm socket and hammer
Refit the pump to the head and tighten both of the bolts
Grab a beer and be proud of yourself now
Sent from my LG-D855 using Tapatalk
Not sure if you have a how to on this already, but here is one for you. I did the job tonight in about 20mins, really easy fix if your power steering pump is pushing fluid out of the reservoir cap.
This is a link to the replacement seal on eBay eBay http://www.ebay.co.uk/itm/161989747487
Tools Needed:
Small "very small" blade screw driver
13mm socket,
3" extension bar,
Ratchet,
Hammer
22mm socket
Firstly undo the 2 M8 (13mm Socket) Bolts holding the Power Steering Pump to the Cylinder Head and pull the pump towards the battery box gently.
Using the small screw driver, pry the seal out of the power steering pump. Be patient with this part, it'll come, go from the outside edge of the rubber and dig it in a bit, take care not to damage the face of the pump.
Place the new seal into position
Press it firmly into place with equal pressure all around and send it home with the 22mm socket and hammer
Refit the pump to the head and tighten both of the bolts
Grab a beer and be proud of yourself now
Sent from my LG-D855 using Tapatalk