UKSaabs

THE site for UK Saab people!
It is currently Fri Apr 19, 2019 12:49 am

All times are UTC



Forum rules


When you put a new thread up in the Workshop please put your car's year and model in the thread title, along with just a brief indicator of the problem.

Car Year - Car Model: Brief description of issue. EXAMPLE- 1999 9-3. Problems starting when hot.

Please also add as much information as you can about the problem, to your post.

This will help us to help you, without having to ask basic details such as what car you have.


Threads with non-compliant titles will be moved to The Pit Lane (in which no replies can be posted, but the OP can edit the thread - upon which the thread will be released to the workshop forum)

Nb. Generic thread titles for truly generic issues that genuinely are not model or variant specific (such as "how do I change the spring in an forge wastegate actuator") are acceptable

**The first 5 posts for new users require individual moderator approval (which they will only get it if they are in line the rules of the forum). Please be patient and allow time for that to happen, and avoid duplicate postings.**



Post new topic Reply to topic  [ 1 post ] 
Author Message
PostPosted: Mon Feb 11, 2019 3:51 pm 
Offline
Active user

Joined: Sat Dec 19, 2015 1:38 am
Posts: 112
Car Model: Saab 9-3 Aero
I did this job at the weekend, having found that the used condenser installed when my Aero struck rock in road was also leaking. Actually it may have been ok, but I did notice that the garage had left off the seal where the line from the receiver dryer joined condenser!

A few questions:

I had to remove bumper and under tray, though I've seen a US video where the guy just removes slam panel. I can't see how this is possible, since the slam panel is held down by two brackets/studs at front (as well as horn mounted on slam panel) which are not accessible without removing bumper! Maybe Aero different in this respect? I did find removing the slam panel and bumper made the job a bit easier.

I replaced the receiver dryer too which is tricky to access in its position behind turbo cooler, but it comes out with engine cover off. Even with leaving the dryer and lines loose I couldn't fit the new condenser so that the bracket on top right side could be screwed into plastic support at top. The left side is fine and both tabs near base of condenser slide into slots. Am I doing something wrong here or are some aftermarket condensers known to be poor fit? Ironically the torx screw on that side with old condenser rounded out on removal, and it took ages to drill out/grind off head of the rounded screw.

Some people claim to have fitted condenser with dryer already mounted. But in that case the fitting to the dryer (from low pressure port) would be some way from its position when dryer separate. Must say would be nice to have integral dryer — reaching the nut on the PAD connection on dryer is only just possible!

I've yet to pull vacuum on system and check the leak is eliminated. Watch this space!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group

follow UKSaabs on Twitter



UKSaabs silhouette logo images by Mark Green www.greenphotos.com
"subsilver2" slightly bodged by UKSaabs for our own use.

:: Disclaimer ::
Comments posted here are the views of their individual authors and are not necessarily shared by the owners of this Web site.
Authors assume all responsibility for comments posted here.

UKSaabs The biggest and best privately owned UK based independent Saab forum for all SAAB enthusiasts.
Whilst we encourage our users to support our advertisers the site wishes to remain independent and therefore does not endorse any particular advertiser(s)
UKSaabs is not affiliated with Saab Cars UK or Saab Automobile AB